Power Quality Meters
|
Socomec |
Schneider |
Northern Design |
Carlo Gavazzi |
|
|
|
|
|
 |
|||
It is becoming increasingly important to monitor the quality of the power supplied to an installation as defined by standards such as EN50160.
SHM supply a range of easy-to-use high-performance electricity meters that not only measure power and energy consumption but also parameters such as power factor, frequency, total harmonic distortion (THD) and harmonic content.
Socomec
 |
DIRIS A40/A41A 3-phase 5A CT-connected 96x96 DIN-panel mounted modular multifunction power quality meter with a 5-line LCD display. Measured parameters include kW, kvar, kVA, Voltage, Current, Power Factor and full Harmonic analysis. Optional plug-in modules are available for Pulse Output and Modbus communications. The A41 analyses the neutral current using a 4th Current Transformer. Click here
DIRIS A40 DIRIS A41 |
 |
DIRIS A60A 3-phase 5A CT-connected 96x96 DIN-panel mounted modular multifunction power quality meter with a 5-line LCD display. Measured parameters include kW, kvar, kVA, Voltage, Current, Power Factor and full Harmonic analysis. The A60 captures anomalous supply events (overvoltage, voltage dips, outages, overcurrent) and provides a graphical representation of these. Optional plug-in modules are available for Pulse Output and Modbus communications. Click here
DIRIS A60 |
Schneider
 |
PM800 SeriesThe PM800 series of modular 3-phase 5A CT-connected multifunction meters offers the high-performance capabilities required to monitor an electrical installation in a 96x96 mm DIN-Panel case. Measured parameters including kW, kvar, kVA, Voltage, Current, Power Factor and Harmonics are shown on the clear 4 plus 2 line LCD display. Four models offer an incremental choice of custom logging and power quality analysis. All models come with Modbus communications, one digital input and one pulse output. Installable option modules offer extra digital inputs & outputs, analog I/O and an Ethernet port. A remote display option is also available. The PM810 is the basic unit and the PM820 adds event logs and harmonic capture up to the 31st. The PM850 adds waveform capture, trending, enhanced alarms and harmonics up to the 63rd. The PM870 adds Sag and Swell detection and enhanced waveform capture. Click here
PM810MG PM820MG PM850MG PM870MG |
Northern Design
 |
Cube 400
|
Carlo Gavazzi
|
WM3-96Class 0.5 energy meter, kWh, kVARh and Demand. Measures watts, VA, VAR, voltage, current, power factor, frequency and harmonic content (up to 50th), per-phase and total. DIN 96x96 enclosure. Analog and pulse outputs. Optional Modbus communications. Click here
|
|
WM4-96Class 0.5 logging meter, similar to WM3-96 but able to store a load profile. Click here
|
|
WM5-96A highly sophisticated 3-pase Utility Grade modular Power Quality Analyzer. Provides accurate measurement of all supply parameters. Optional modules available include digital input and output, Analog output, RS485, RS232 and Ethernet. Click here
|
|
WM22-DINA modular power analyser, measuring all supply parameters, including Total Harmonic Distortion (up to 7th harmonic) of voltage and current. Two pulse outputs. Available as 5A CT-operated or direct connected up to 90A per phase (Ib = 20A, Imax = 90A). Click here
|
You will need Adobe Reader to view these product brochures. If you do not have
this already installed on your computer, click the button to install it for free.